SBH15-M.F Dedicated Amorphous Alloy Oil-Immersed Distribution
Transformer for Wind Power PlantProduct Description
In recent years, the application of wind and other renewable energy
is becoming increasingly popular, and their development has become
much rapider. The dedicated amorphous alloy oil-immersed
distribution transformer for wind power plant of Zhixin Electric
Co., Ltd. (hereinafter referred to as dedicated amorphous oil
transformer for wind power plant) emerges.
Wind power dedicated amorphous oil transformer is connected
primarily with the ram side of wind power generator, and
secondarily with power grid via high-voltage equipment, as an
important needful part in the power generation system of wind power
plant. It’s highly appraised and well received by users for its
energy-saving, efficient and reliable features.
Advantages
Complete varieties and specifications;
Featured by ultra-low dead time loss and obvious energy-saving
results effects;
Fuel tank adopts a fully-enclosed structure, and tank shell is
coated with acid-resisting & alkali-resisting protective paint,
suitable for a humid environment, with long-term operation
experience in the coastal humid area.
Product Classification
Two kinds according to installation method, namely, YBF dedicated
amorphous alloy prefabricated substation for wind power plant
installed outside of the tower, and SBH15-MF dedicated amorphous
alloy oil-immersed distribution transformer for wind power plant
installed inside of the tower.
Three kinds according to secondary voltage grades, namely, 35KV,
20KV, 10KV; primary rated voltage is averagely 690V.
SBH15-M.F Dedicated Amorphous Alloy Oil-Immersed Distribution
Transformer for Wind Power Plant
Model Implication:
Extensibility Design Concept
SBH15-M.F dedicated amorphous transformer for wind power plant is
suitable for being installed in the tower. Its main part and
radiator adopt extensibility connection, easy for installation and
replacement.
Product Performance Parameters and Overall Dimensions
Outline Drawing of the Transformer inside of WindPowerTower ：
Products comply with the standards
GB 1094.1Power Transformer Part 1 General Provisions
GB 1094.2Power Transformer Part 2 Temperature Rise
GB 1094.3Power Transformer Part 3 Insulation Level, Insulation Test
and External Insulation Air Gap
GB 1094.5Power Transformer Part 5 The Ability to Withstand
Short-circuit
GB / T 6451Technical Parameters and Requirements of Oil-immersed
Power Transformers
Q / SIHG 23Technical Parameters and Requirements of 35KV Amorphous
Alloy Iron-core Sealed Three-phase Oil-immersed Distribution
Transformers
Ordering Instructions
4. The performance parameters, power supply program, overall
dimensions etc involved in this sample are all technical parameters
of conventional products.
5. The high-voltage wiring scheme and low-voltage wiring scheme can
be designed according to user needs. The final product dimensions
may be inconsistent with the product samples, and should be based
on the final provided drawings.
6. Any sample material not stipulated here will be negotiated in
instructions through the ordering technology agreement.
